1 / 9
Sirius Pro Plus with the 10 m mast extended and 4 floodlights
Sirius Pro Plus extended with the doors open Sirius Pro Plus retracted with the housing closed Sirius Pro Plus light towers stacked for transport Sirius Pro Plus retracted with the doors open Astro/time switch inside the housing Distribution box inside the housing Sirius Pro Plus on a trailer
Sirius Pro Plus enlarged 1 / 9

Pre-order now open

The Sirius Pro Plus is new. Deliveries start at the end of October 2026.

Mobile light towers

Sirius Pro Plus

Stackable mobile light tower with a 6-section telescopic mast up to 10 m. 360-degree coverage from one compact, enclosed housing.

€ 3.610,00 – € 5.300,00 excl. VAT
VAT calculated at checkout based on your country
  • – 10 m telescopic mast, 6 sections
  • – 360-degree all-round coverage
  • – Up to 4 floodlights, 204,000 lumen
  • – Plug & play, ready in minutes
  • – Stackable with floodlights fitted
  • – CE certified, 2-year warranty
Included as standard
Request a quote
Pre-order now, deliveries from end of October 2026
SKU: SIRIUS-PRO-PLUS
Category: Mobile light towers

Pre-order now

Deliveries from end of October 2026.

Secure payment

iDEAL|Wero Credit card SEPA

Quality guaranteed

CE certified, with a 2-year warranty.

About this product

The Sirius Pro, with a 10-meter mast

The Sirius Pro Plus is a mobile light tower with a 6-section telescopic mast up to 10 meters and 360° illumination. It is the Sirius Pro with a longer mast: 1.5 meters higher, so the light shines over buildings and scaffolding as your project rises. Up to four LED floodlights deliver up to 204,000 lumen. Like the Pro, it is plug & play on 230V, with the ballast built into the closed housing and stabilizers included as standard. The housing is stackable with the floodlights fitted, which saves space in storage, and forklift pockets on all four sides make it easy to move between projects. CE certified.

Why the Sirius Pro Plus

10 meters of height, with the ease of a mobile mast

10 meters, 360° illumination

The 6-section telescopic mast extends to 10 meters. Up to four LED floodlights on the cross-piece light all around, with up to 204,000 lumen. The extra height lets the light shine over buildings and scaffolding.

Plug & play setup

Delivered ready to use. Connect to a standard 230V outlet with the 10-meter cable, raise the mast and switch on. No parts to assemble on site, no groundwork, no generator required.

Ballast built into the housing

The ballast is part of the design and sits inside the closed housing, with stabilizers included as standard. No separate concrete blocks to source and place on site.

Set up by one person

The extended winch handle lets you raise the mast while standing outside the housing, so you work upright instead of bending into it. An automatic safety stop prevents the mast from lowering unexpectedly.

Compact and stackable

The compact housing takes up little space on site. The closed top allows units to be stacked with floodlights mounted, saving space in your storage between projects.

Forklift pockets on all sides

Pockets on all four sides allow forklift access from any angle, plus four lifting eyes for crane handling. Move the mast along as the work progresses.

Technical specifications

Engineered for performance and longevity

Dimensions & weight

Mast height (extended) 10 m
Mast height (retracted) 2.35 m
Mast construction 6-section telescopic mast
Base footprint 111 × 111 cm
Structure weight (excl. ballast) 462 kg
Concrete ballast 552 kg (2 × 276 kg)
Total weight incl. ballast 1,014 kg
Load capacity mast top 60 kg
Material Galvanised steel

Lighting

Number of floodlights 2 or 4 on cross-piece
Power per floodlight 200W or 300W LED
Light output (2 or 4 floodlights) 68,000 to 204,000 lm
Light efficiency 170 lm/W
Colour temperature 6,000 K
Coverage 180° (2 floodlights) / 360° (4 floodlights)
Supplied without floodlights Possible

Power & operation

Power supply 230V
Connection cable Separate, 10 m
Plug type Belgian plug (Type E)
Cabling in the mast Spiral cable in telescopic outer tube
Switching Manual, dusk-to-dawn sensor or astro & timer switch (option)
On/off switch In an IP65 box
Raising the mast Extended winch handle, operated from outside the housing
Winch CE certified, 1,800 lbs

Housing & safety

Housing Fully closed
Access Two doors
Lock Sliding bolt (padlock optional)
Junction box IP65
Safety stop Automatic at full height
Spirit level Included
Stabilisers Included as standard, always use
Guy ropes Included as standard, use optional

Transport & handling

Forklift pockets On all 4 sides
Lifting eyes 4 for crane handling
Stackable Yes, with floodlights mounted
Light tower trailer Fits
Assembly before use Not required

Options & certification

Options Dusk-to-dawn sensor, astro & timer switch
Branding All four sides can be fitted with stickers
Compliance CE
Warranty 2 years
Article number 1673700

About wind load: the 552 kg ballast sits inside the housing and the stabilisers are included as standard. Our advice: always fit the stabilisers before you extend the mast. Retract the mast from wind force 10 (storm, 89 km/h and above) or whenever conditions are in doubt. For the Sirius Pro Plus we deliberately do not state a maximum wind speed. The guy ropes are included as standard and you can use them for extra stability. Want to know what is responsible in your situation? Request a quote and we will look at it with you.

Sirius Pro Plus vs standard light tower

Mobile or fixed at 10 meters?

Both bring your light to around 10 meters. The difference is how you use them. A standard light tower is a fixed mast that you assemble and weigh down on site. The Sirius Pro Plus is a complete mobile mast that you put down, plug in and take with you after the project.

This product

Sirius Pro Plus

Mobile, ready to use

Standard light tower

Fixed, assembled on site

Mast height (max.)
10 m
10.5 m
Type
Mobile
Fixed installation
Delivery
Ready to use, plug & play
Dismantled, assembled on site
Ballast
552 kg, inside the housing
Around 1,000 kg, separate on the frame
Base footprint
111 × 111 cm
200 × 200 cm
Setup
By one person, mast raised with the winch
Place the frame, add ballast, assemble the mast
Moving
Forklift pockets on all sides, 4 lifting eyes
Intended to stay in one place
Stackable with floodlights
Yes
No
LED floodlights
2 or 4 (cross-piece)
2 (T-piece)
Max. light output
204,000 lm
102,000 lm
Floodlight maintenance
Retract the mast
Lower and tilt the mast
Power supply
230V, 10 m cable
230V
Certification
CE
CE-certified winch

Choose the Sirius Pro Plus

if you need 10 meters of height at changing locations or for a project with an end date. No assembly, the ballast sits in the housing, and afterwards you stack the units in your storage.

Choose a standard light tower

if the lighting stays in the same place for years and you do not need to move the mast.

Frequently asked questions

Everything you need to know before ordering

Can't find your answer here? Get in touch and we'll get back within 24 hours.

When is the Sirius Pro Plus available?

The Sirius Pro Plus is new and available as a pre-order. Deliveries start at the end of October 2026. You can place your pre-order through the webshop or request a quote, and we will confirm the delivery date with you.

What is the difference with the Sirius Pro?

The difference is in the mast and the stabilisers. The Sirius Pro Plus has a 6-section telescopic mast up to 10 meters, the Sirius Pro a mast up to 8.5 meters. On the Pro Plus the stabilisers are included as standard, on the Sirius Pro they are an option. The housing, the 111 × 111 cm footprint and the retracted height of 2.35 m are the same. The longer mast makes the Pro Plus 50 kg heavier. If 8.5 meters is enough for your site, take a look at the Sirius Pro.

How does it compare to a standard light tower of 10 meters?

The height is similar, the way you use it is not. A standard light tower is delivered dismantled. You assemble it on site and weigh down the frame with around 1,000 kg of separate ballast. The Sirius Pro Plus is delivered ready to use with the ballast inside the housing, and after the project you take it with you. If the lighting stays in one place for years, a standard light tower can be a good fit.

Do I need to assemble the mast or add ballast?

No. The mast is delivered complete and the 552 kg concrete ballast (2 × 276 kg) is already inside the housing. Place the unit with a forklift or crane, plug it in and winch the mast up. No separate ballast, foundation or groundwork is needed.

Can one person set up the Sirius Pro Plus?

Yes. With the extended winch handle you raise the mast while standing outside the housing, so you do not have to bend into it. At full height the automatic safety stop engages, which prevents the mast from lowering unexpectedly. To place the unit you use a forklift or crane.

How much light does it give and which options are there?

You choose two or four floodlights of 200W or 300W, good for 68,000 to 204,000 lumen at 6,000 K. You can also order the mast without floodlights. Two floodlights light in one direction (180°), four light all around (360°). Switching is manual, with a dusk-to-dawn sensor or with an astro and timer switch. Stabilisers and guy ropes are included as standard.

Can the Sirius Pro Plus be used in strong wind?

The 552 kg ballast sits inside the housing and the stabilisers are included as standard. Always fit the stabilisers before you extend the mast. Retract the mast from wind force 10 (storm, 89 km/h and above) or whenever conditions are in doubt. For the Sirius Pro Plus we deliberately do not state a maximum wind speed. You can use the guy ropes for extra stability.

Is the mast stackable and how do I move it?

Yes, you can stack the units with the floodlights mounted, because the closed housing runs up to the top. That saves space in your storage. You move the mast with a forklift through the pockets on all four sides, or with a crane using the four lifting eyes. The SiriusMast Trailer also fits the Sirius Pro Plus.

What certifications does the Sirius Pro Plus hold?

The Sirius Pro Plus is CE approved. The LED floodlights comply with EN 60598 for luminaires.

What warranty does the Sirius Pro Plus come with?

The Sirius Pro Plus comes with a 2-year warranty covering manufacturing defects and component failures under normal use. The mast structure, housing and LED floodlights are all included. Damage from misuse, accidents or unauthorised modifications is not covered.

Request a quote

Interested in the Sirius Pro Plus?

The Sirius Pro Plus is available as a pre-order, with deliveries from the end of October 2026. Tell us about your site and configuration. We'll send a tailored proposal within 24 hours, including pricing for your setup and the expected delivery date.

  • Response within 24 hours Direct from our sales team, not an auto-reply.
  • No obligation A quote is just a proposal. You decide if it fits.
  • Tailored to your setup Floodlights, switching, transport and delivery worked out together.
  • Direct from manufacturer No middlemen, no markups, no slow responses.

Get your quote

Minck Wouters, Co-CEO SiriusMast
Minck Wouters Co-CEO
Personal contact

Prefer to talk it through directly?

Drop by our location or we'll come visit you on site. For larger projects, we'll work out a tailored proposal together. No forms, no waiting.

Free tailored quote

Within 24 hours · no obligation

Request a quote